DolceraWiki - User contributions [en]

Clariant Mining Chemicals

2008-05-13T02:49:12Z

Shibang jerry:

== Clariant Mining Chemicals ==

Clariant Mining Chemicals - Chemicals for Mineral Treatment
Clariant provides an excellent range of products, backed up by technical service and expertise. This includes flotation agents, collectors, frothers, extraction agents, dispersants, depressants, filter aids, antiscale agents, anticaking agents for solid fertilizers, corrosion inhibitors for liquid fertilizers, dust control agents and explosive emulsifiers. The products are marked under HOSTAFLOT, FLOTINOR, FLOTIGAM, FLOTICOR, GENAMIN, ARKOPAL, GENAGEN, MONTANOL, FLOTANOL, FLOTOL, HOSTAREX, EMULSOGEN and TYLOSE tradenames.

Clariant offers a complete range of agents for all flotation operations and assists in solving problems in the treatment of fertilizers and provides different types of emulsifiers for explosives.

CLARIANT MINING ACTIVITIES
The mining department has helped to pioneer flotation reagents, which have featured in the company's sales range for more than 60 years (former Hoechst). Specific problems require individual solutions so Clariant's technical staff is constantly developing new reagents which are available for test work in laboratories, pilot plants and full scale operation.

Centers of competence for Clariant Mining Chemicals are Germany, Brazil, Chile and Australia. In addition, Clariant representatives can be contacted worldwide in more than 60 countries.

FROTHERS
Frothers are surface-active chemicals whose function is to provide a large air-water interface. Unlike collectors, it is difficult to associate a certain type of frother with any particular mineral system. Frothers are classified into groups depending upon their molecular type:

Aliphatic alcohols
Alkyl polyglycol ether formulations
Alkyl polypropylene glycol ethers
The Clariant range (MONTANOL, FLOTANOL and FLOTOL) includes representatives of all these groups of compounds. Therefore we can offer suitable products for any flotation process, irrespective of whether ores, potassium salts, industrial minerals or coal are to be floated.

COLLECTORS
Collectors can be divided into a number of varieties based on the functional group involved and on the type of mineral collected:

Collectors for sulphidic ores:

Aliphatic and aromatic dithiophosphates
Mercaptobenzthiazole formulation
Thionocarbamates
Collectors for non-sulphide and non-metallic ores:

Fatty acid
Sodium alkyl sulphates
Mono/Di phosphoric acid esters
Cationic collectors
Primary amines
Fatty alkyl propylene diamines
Quaternary ammonium chloride
Imidazolines
Non-Ionic collectors and Emulsifiers.
EXTRACTANTS
Tertiary amines for solvent extraction after leaching are used in the solvent extraction process.

HOSTAREX A 324 is mainly used to separate cobalt and nickel but is also suited for the extraction of many other metals
HOSTAREX A 327 is applied extensively in the Uranium processing industry and can also be used for the extraction of W, Mo, Re, Cd, Rh and organic acids
ADDITIVES FOR THE FERTILIZER INDUSTRY
Fertilizer ( AN, CAN, NPK, KCl, Urea) tends to cake during long storage, especially during sea transport. The free flowing properties of fertilizers can be maintained by a conditioning treatment with an anticaking agent of the FLOTIGAM-type.

Water repellants, corrosion inhibitors for liquid fertilizers and granulation agents are also available for the specific treatment of fertilizers.

EMULSIFIERS FOR ANFO EXPLOSIVES
Ammonium nitrate/fuel oil emulsions explosives produced by using EMULSOGEN-type emulsifiers are pumpable and storage stable up to two years. Explosive emulsifiers of the type EMULSOGEN are particularly suited for the preparation of packaged and bulk applications. Emulsions prepared with EMULSOGEN exhibit a high stability to chemical gassing and shear stress as well as thermal stability and water resistance. Emulsions activated by gassing or by the addition of glass bubbles reach excellent results (e.g. explosion velocity, cap sensitivity) in blasting trials.

Other Mining Machine Equipment:

[http://shsb.en.alibaba.com Crusher]
[http://shsb.en.alibaba.com/group/50060815/Stone_Making_Machines.html Stone Crusher]
[http://shsb.en.alibaba.com/product/50060815/52117360/Stone_Making_Machines/Stone_Crushers_Crusher_Jaw.html Jaw Crusher]
[http://shsb.en.alibaba.com/product/50060815/52171527/Stone_Making_Machines/Impact_Crushers_Ore_Crushers.html Impact Crusher]
[http://shsb.en.alibaba.com/product/50060815/202637415/Stone_Making_Machines/Cone_Crusher_Gyratory_Crushers.html Cone Crusher]
[http://shsb.en.alibaba.com/product/50060815/51810559/Stone_Making_Machines/Hammer_Crusher_Hammer_Mill.html Hammer Crusher]
[http://shsb.en.alibaba.com/product/50060814/200199621/Sand_Making_Machines/SBM_VSI_Crusher_Sand_Making_Machine.html Vsi Crusher]
[http://shsb.en.alibaba.com/group/50092404/Grinding_Mill_Machine.html Grinding Mill]
[http://shsb.en.alibaba.com/product/50092404/50275913/Grinding_Mill_Machine/Raymond_Mill_Raymond_Grinder.html Raymond Mill]
[http://shsb.en.alibaba.com/product/50060815/50275919/Stone_Making_Machines/Vibrating_Screen.html Vibrating Screen]
[http://shsb.en.alibaba.com/product/50060815/52172367/Stone_Making_Machines/Vibrating_Feeders.html Vibrating Feeder]
[http://shsb.en.alibaba.com/product/50060815/50275920/Stone_Making_Machines/Belt_Conveyor.html Belt Conveyor]
[http://shsb.en.alibaba.com/product/50092404/51444906/Grinding_Mill_Machine/Ball_Mill.html Ball Mill]
[http://shsb.en.alibaba.com/product/50092404/51112676/Grinding_Mill_Machine/Roller_Mill_Roller_Grinder.html Grinder Mill]

SBM

2008-03-05T07:21:08Z

Shibang jerry:

== SBM ==

-------------------------------------------------- ------------------------------
[http://www.sbmchina.com SBM] is a professional manufacturer of [http://www.shibang-china.com/Stone_Crusher_Series.html mining crushers] and industrial [http://www.shibang-china.com/Griding_Mill_Series.html grinding mills], located in beautiful Pudong New District, with factory area of more than 70,000 square meters. The company features advanced CAD and computer simulation test system, which ensures the quality of design, development, manufacturing and after-sale service.

SBM Other Site:
[http://www.shibang-china.com Crusher]

[http://www.stone-crusher.net Stone Crusher]

[http://www.jaw-crusher.net Jaw Crusher]

[http://www.impact-crusher.net Impact Crusher]

[http://www.conecrusher.net Cone Crusher]

[http://www.vibratingfeeder.net Vibrating Feeder]

[http://www.grinding-mill.net Grinding Mill]

http://www.raymondmill.biz Raymond mill]

Hongdaxing Cone Crusher work should pay attention to what matters

2007-12-29T03:37:22Z

Shibang jerry:

== STONE CRUSHER is an original music ==

STONE CRUSHER is an original music, heavy metal band made up of a group of musicians that are dedicated to playing the music that they love best. Thunderous percussion combined with heavy, melodic bass lines carry the rhythms of STONE CRUSHERS' music. This is complimented by crushing guitar riffs, and melodic, metal vocals that create the bands' unique sound. The quartet features CHRIS (Stone V) on lead vocals whose ability to deliver powerful melodies and lyrics with meaning will keep you listening. The rhythm section of the band is driven by drummer KEVIN (Stone D'Animal) who will amaze you with his impeccable timing and tempo changes while never missing a beat. His drumming style has been compared to that of the legendary John Bonham with a twist of Neil Peart. STONE B (DAVE) holds down the groove with his powerful, flowing bass lines that will kick you right in the chest and make you feel the music. The metal attack of guitarist BOB (Stone G) along with his subtle, melodic playing techniques are the defining sound of Stone [http://www.sbmchina.com Crusher] music. A riff master in his own right, BOB lays it down heavy and in your face...the way it was meant to be! The band is currently balancing studio time along with live shows while finishing up the recording of their debut album "STONE CRUSHER". The full length album was originally scheduled to be released in November 2007, but was recently pushed out until Spring 2008 so that more time can be spent in perfecting the final product... In the meantime, they have released a four song demo of some of their new material. Featured on this page are the songs "Bury Me With My Sword", "The Tower", "The Kraken", and "Crusades" from the disk which is entitled "Four Stones". Club dates are currently being arranged to promote the release of the new CD, and you'll be able to catch [http://www.sbmchina.com/products/Crushing/ stone crusher] live at venues throughout the area. The band hopes that you like the tunes, and thanks you for your support. "STAY METAL"

[http://www.sbmchina.com SBM]
[http://www.sbmchina.com Crusher]

SBM Cone Crusher the basic structure and working principle of what

2007-12-29T02:02:27Z

Shibang jerry:

== Shibang Cone Crusher the basic structure and working principle of what? ==

[http://www.grinding-mill.net/cone_Crusher.html Cone Crusher] broken ore [http://www.crusher-china.net crusher] and the cycle is basically the same. Cone crusher also used movable and fixed between MERCOSUR face for the Crushing. Dynamic cone bearing on the spherical bearing, and fixed in a vertical shaft hoisting, the vertical axis placed eccentric cone crusher sleeve, and the eccentric sleeve is placed on the thrust bearing.
Fixed Cone together with the vertical axis driven by the eccentric bushings, eccentric bushings to the horizontal axis and
the bevel gear and pulley to drive. Triangle from the motor pulley belt transmission. Vertical Axis eccentric sleeve into the
bottom, when the eccentric sleeve rotation, the shaft to draw a cone surface. So Cone moving around at the fixed cone shall
crushed ore. From the upper and lower chassis composed of two parts, connected by bolts. Bolt on kits in a strong spring,
when spring is the role of metal or other hard objects into the crushing chamber, will not damage breakers (such as spindle,
etc.). If a piece of metal or other hard objects (nuts, brazing first class) and the ore went into crushing chamber, dynamic
cone was not raised, I increased discharge can be discharged. Sometimes cone crusher is to use oil (or water) discharge
device to adjust the size of mouth.

In addition to the standard head - and short-[http://www.grinding-mill.net/cone_Crusher.html Cone Crusher], but also between them, namely the difference between the medium-sized cone crusher that can be used can also be used in the broken chronology. Standard, medium-sized, short head [http://www.grinding-mill.net/cone_Crusher.html Cone Crusher] The main difference is the crushing chamber profile different shapes. Therefore, to the mine discharge particle size
and particle size are also different.
Ore from the mine mouth through the allocation of disk into the machine, and distribution vertical shaft was installed in the
end, due to the vertical axis rotation, and access to vibration, uniform distribution of the ore in the cone around. With the
help of the Toggle handle and hinge, the cone is not moving upward or downward, to regulate the discharge of the mouth width.
Steel with the various components are manufactured, dynamic cone and fixed cone face laced with manganese steel liner to
protect the cone from wear, worn liner can be replaced, the replacement, the liner between the cone and poured melted Lead
close bond between them.

[http://www.sbmchina.com SBM]
[http://www.sbmchina.com Crusher]

New Crusher:Shibang Crushers

2007-12-29T01:44:42Z

Shibang jerry:

== Shibang Crusher broken What are the mains way ? ==

Ore crushing and grinding method primarily with the role of institutions of the more common mechanical force generally have
the following five.
1. Crushed by two broken face when approaching the squeeze pressure and make the materials broken. Impact crusher, [http://www.grinding-mill.net/Hammer_Crusher.html hammer crusher], [http://www.grinding-mill.net/Cone_crusher.html cone crusher]
Crushing machines are the main mode of broken machinery.
2. Split broken teeth wedge tip is to use the materials to carry out the split of the broken, and the role of the
concentration of a limited fragmentation, adapted to brittle
Materials broken.
3. Broken materials in the face of crushing load as bear on the two points (or fulcrum) beam, the material itself in packs of
breaking Whitty
Broken.
4. Stripping two broken face grinding materials made in the relative movement of materials imposed shear stress, so that
material rupture occurred. Of this fine-grained materials suitable for [http://www.grinding-mill.net/ grinding mill].
5. Crushing impact of the use of it is broken ore. Impact of the moment is the role of the ore. For example, the [http://www.grinding-mill.net/Impact_Crusher.html impact crusher] is broken in the main impact .

[http://www.sbmchina.com SBM]
[http://www.sbmchina.com Crusher]

Cone-crushers-machine

2007-12-07T02:33:11Z

Shibang jerry:

[http://www.pulverizer.com.cn/jaw-crusher.htm Cone Crusher]is one of the main types of primary crushers in a mine or ore processing plant. Cone crushers are designated in
size either by the gape and mantle diameter or by the size of the receiving opening. Gyratory cone crushers can be used for
primary or secondary crushing. The crushing action is caused by the closing of the gap between the mantle line (movable)
mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is
opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The
vertical spindle is free to rotate around its own axis

[http://www.crusher-in-china.com/cone_crusher.html Cone Crushers] are robust and designed with many inputs gathered from various aggregate producers. Numerous design features
incorporated to reduce down time and maintenance and will help in increasing the production and profitability.

Design Features
Optimum crusher
stroke & steep chamber
for maximum production
rates.

Hydraulically operated
gap setting adjustment.

Inter changeable from
standard to other crusher
chamber configurations.

Anti-friction roller bearing
for efficiently transferring
the power to crushing
task.

Our cone crusher is suitable to crush medium size, fine and ultrafine powders depending on the different type.

[http://www.jawcrusher.biz Cone Crusher] is one of the main types of primary crushers in a mine or ore processing plant. Cone crushers are designated in
size either by the gape and mantle diameter or by the size of the receiving opening. Gyratory cone crushers can be used for
primary or secondary crushing. The crushing action is caused by the closing of the gap between the mantle line (movable)
mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is
opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The
vertical spindle is free to rotate around its own axis. The crusher illustrated is a suspended spindle type, meaning that the
main shaft is suspended at the top and that the eccentric is mounted above the gear.

SBM Hydraulic Cone Crusher purpose

2007-12-06T02:29:42Z

Shibang jerry:

== SBM Hydraulic Cone Crusher purpose ==

New [http://www.shibang-china.com/info/Cone_crusher.html cone crusher] not only improve the productivity and efficiency of
broken, but also expanded the scope of application, from the limestone to basalt from the stone production to various ore
crusher and efficient completion of the broken, minor, minor operations Super. Mine construction industry today is
alternative [http://www.shibang-china.com/info/Cone_crusher.html spring cone crusher] and replace the hydraulic cone crusher
general of the latest generation of products, large and mining is the best broken equipment.

Hydraulic Cone Crusher features and technical advantages:
[http://www.shibang-china.com/info/Cone_crusher2.html HP Series Hydraulic efficient hydraulic cone crusher] has exceeded
spring cone crusher and general hydraulic cone crusher greater advantages:
1, broken than big, high production efficiency
-- Will be even higher speed and stroke, putting HP Crusher and the rated power through greater capacity and improved
production efficiency than broken.
2, the vulnerability of less consumption, low running costs
-- Reasonable results, broken principle and the advanced technical parameters, operational reliability, low operating costs;
breakers are wear-resistant components of all protection, will reduce maintenance costs to a minimum, the useful life of the
general increase of more than 30%.
3, pyramid broken, refined grain shape Merit
-- Through the use of tablets of pyramid design principle of the special crushing chamber and their corresponding matching
speed rather than the traditional single-particle breakage theory, to achieve selective crushing of materials significantly
enhanced the product material and the proportion of small cube content, great extent, a decrease of needle sheet materials.
4, hydraulic and hydraulic-cavity protection, a high degree of automation, reduce downtime
-- Hydraulic conditioning nesting mouth and overload protection to the level crusher operation greatly improved and the
maintenance simpler, more convenient operation, a shorter downtime; HP series cone crusher iron release a two-way hydraulic
cylinder enables iron through the crushing chamber, the aircraft occurred in the iron and transient nausea cars
circumstances, to a hydraulic roof, automatic nesting and greatly reduce the original spring cone crusher downtime required
for the artificial nesting trouble, and many other manufacturers Crusher is a result of the Rail card stands. ...
5, rare lubrication, reliable advanced, improve life
-- Unique dilute oil lubrication system design, greatly increasing the useful life of equipment. High-performance non-contact
labyrinth seals with wear and improve the reliability of the unstoppable dust, basically remove the original spring water
mixed cone crusher oil and other common fault.
6, multiple broken cavity type, application flexibility, adaptability
-- [http://www.shibang-china.com/info/Cone_crusher2.html HP cone crusher] will only replace the cone liner, moving cone
liner, the crushing chamber from the standard super-shaped cavity of the rough short of the first cavity ultrafine arbitrary
transform, adapt to the larger size of the product requirements.
7, maintenance is simple, user-friendly operation
-- HP cone [http://www.shibang-china.com/ crusher] all components can be removable from the top or side and maintenance,
dynamic cone and fixed cone removable convenience, without removable rack, fastening bolts, which HP [http://www.shibang-
china.com/info/Cone_crusher2.html cone crusher] Liner more convenient day-to-day replacement . Using hydraulic motors,
breakers production efficiency best.
8, it offers higher capacity, the best products grain shape, and easy to control, with the greatest reliability and
flexibility for the users really create more value.

Chinaese and English crusher

2007-11-15T07:21:20Z

Shibang jerry:

==impact crusher history==
1. Commonly used in the top-five broken machinery, and counter Breakers hammer crusher belong mainly to the impact of brittle materials to broken machines, so often referred to as impact crusher. The impact crusher with a compression-based breakers, such as the jaw, Park and roller cone crusher machines than have the following characteristics:

A. Broken than big. The impact crusher broken than can be achieved 50 more, with jaw, Park cone and roll crusher difficult to over 20. Therefore, the need for single-paragraph broken occasions, such as the cement industry limestone crusher, the impact crusher use is widespread.

B. Products particles good. Under the impact, was broken along its materials are often the most vulnerable level fragmentation, this selective broken, its particle morphology was the probability of higher cube, it shocks Breakers needle products can be low in percentage Flake at 10%, and jaw, Park and roller-cone machine products such as broken needles Flake percentage level is higher than 15 percent. Therefore, in need cube particles occasions. For example, the non-slippery highway pavement, usually impact crusher used as a final break equipment, the production of concrete aggregate.

These characteristics, the impact crusher in numerous broken machinery occupy important positions.

2 However, due to the [http://www.shibang-china.com/info/Impact_Crusher.html impact crusher] principle is broken by the impact of materials, their anti pieces, such as: hammer, hammer plate, plate counterattack, in use and wear very quickly. This shortcoming, in a considerable long period of time, the impact crusher limit the scope of application. Hard materials can only be used in the crusher. In the early 1950s, with the application of new wear-resistant materials, the German company first introduced KHD Hard Rock impact crusher, breaking the limitations of this type, improved version of this model is still in production.

重型锤式破碎机是吸收锤式破碎机和反击式破碎机两种破碎机的优点，经优化设计后推出的新一代产品本系列产品是吸收锤式破碎机和反击式破碎机两种破碎机的优点，经优化设计后推出的新一代产品，具有以下十大优点:
1,进料口大,破碎腔高，适应物料硬度高、块度大，产品石粉少。
2,物料悬空,破碎功耗小。
3,新颖锤头，冲击力大。
4,锤轴安装可调，锤头寿命长。
5,栅格尺寸可调，产品粒度可控，颗粒形状好。
6,机箱可翻转，检修更方便。
7,方柄螺栓，抗冲击、抗磨损。
8,结构紧凑，机器刚性强。
9,拼体结构,搬运、安装方便。
10,冲击、反击、撞击(石打石)破碎功能全,生产效率高,机件磨耗小,综合效益显著。

Shanghai jaw crusher

2007-10-25T13:14:34Z

Shibang jerry:

[http://www.mill-in-china.com/jaw_crusher.htm shanghai jaw crusher] are ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity.

The jaw crusher is a kind of crushing equipment of a long history, featuring simple and firm structure, reliable operation, convenient maintenance and repair and low operation cost, so it is still widely used in metallurgy, chemical, building material, power, communication and other industries, for the primary, secondary and tertiary crushing of ores and rocks with the compressing strength of 147～245Mpa, to crush materials of different sizes to uniform small grains. It can be used with the ore dressing equipment or used independently.

It can be used to produce the aggregate for subgrade, railway ballast and construction sand and stone. The jaw crusher is divided into the coarse jaw crusher and the fine jaw crusher, i.e. PE series and PEX series.

Features:
High reduction ratio, uniform grain size, simple structure, reliable operation, simple convenience and low operation cost.

Working principle:
The motor drives the belt pulley and the belt pulley drives the eccentric shaft to rotate, and make the moving jar approach and leave the fixed jaw periodically, to crush, rub and grind the materials repeatedly, thus to make the material slower and slower and gradually fall down and finally discharge from the discharge opening.

Ball mill

2007-10-10T03:42:41Z

Shibang jerry:

A [http://www.stone-crusher.org/ball_mill.html Ball mill], a type of Mill, is a cylindrical device used to grind (or mix) materials like ores, chemicals, ceramic raw materials and paints. Ball mills rotate around a horizontal axis, partially filled with the material to be ground plus the grinding medium. Different materials are used for media, including ceramic balls, flint pebbles and stainless steel balls.

[http://www.mill-in-china.com/ball-mill.htm Ball mill], a kind of horizontal drum-type rotating device, is a grate mill with external gear and double bins. Materials shall be evenly charged through quill shaft in feeding device into the first bin, which has step or waved lining with steel balls in different specifications. Steel balls are taken to a certain height by centrifugal force from drum rotation and then fall. Thus it will give a heavy blow to materials, playing a role of grinding. Materials after crushed in the first bin shall enter bin across single-layer diaphragm into the second, which is provided with flat lining with steel balls, to go through further grinding. Powder shall be discharged from discharging grating, ending the milling process.

[http://www.crusher-in-china.com/Ball_mill.html Ball mill] is mainly composed of charging and discharging, cyclone and rotation parts (like redactor, minor rotation gear, motor, electric machine, etc). Hollow axis is made of steel parts with a lining replacable. Major rotation gear, machined by rolling wheel of casting, is lined with wearing plate with fine wear-resisting property. This machine runs stably and reliably.

Based on difference of materials and discharging types, dry ball mill and wet ball mill are selectable.

Griding Mill Series

2007-08-28T14:12:54Z

Shibang jerry:

==Griding Mill Series==
A grinding mill is a unit operation designed to break a solid material into smaller pieces. There are many different types of grinding mills and many types of materials processed in them. Historically mills were powered by hand (mortar and pestle), working animal, wind (windmill) or water (watermill). Today they are also powered by electricity.
<nowiki>from:<a href='http://www.shibang-china.com/Griding_Mill_Series.html'>Griding Mill Series </a> </nowiki> from:http://www.shibang-china.com/Griding_Mill_Series.html
The grinding of solid matters occurs under exposure of mechanical forces that trench the structure by overcoming of the interior bonding forces.
After the grinding the state of the solid is changed: the grain size, the grain size disposition and the grain shape.
Grinding may serve the following purposes in engineering: magnification of the surface area of a solid manufacturing of a solid with a desired grain size pulping of resources

Grinding mill

2007-08-28T13:05:57Z

Shibang jerry:

==grinding mill==
A grinding mill is a unit operation designed to break a solid material into smaller pieces. There are many different types of grinding mills and many types of materials processed in them. Historically mills were powered by hand (mortar and pestle), working animal, wind (windmill) or water (watermill). Today they are also powered by electricity.
from:http://www.shibang-china.com/Griding_Mill_Series.html
The grinding of solid matters occurs under exposure of mechanical forces that trench the structure by overcoming of the interior bonding forces. After the grinding the state of the solid is changed: the grain size, the grain size disposition and the grain shape.

Grinding may serve the following purposes in engineering:

magnification of the surface area of a solid
manufacturing of a solid with a desired grain size
pulping of resources

Cone Crushers

2007-08-28T11:40:34Z

Shibang jerry:

==Cone_Crushers ==

This [http://www.shibang-china.com/info/Cone_crusher.html crusher] is suitable for crushing varies of mid-hard and above mid-hard ores and rocks. It has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the [http://www.shibang-china.com/info/Jaw_crusher.html crushing] chamber without damage to the [http://www.shibang-china.com/info/Cone_crusher.html crusher], use dry oil, water, two kinds of sealed formation. It makes plaster stone and engine oil separated, assured reliable performance.

==Cone_Crushers Technology==
[http://www.shibang-china.com/info/Cone_crusher.html Cone crusher] is one of the main types of primary [http://www.shibang-china.com/info/Jaw_crusher.html jaw crushers] in a mine or ore processing plant. [http://www.shibang-china.com/info/Cone_crusher.html Cone crushers] are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Gyratory [http://www.shibang-china.com/info/Cone_crusher.html Cone crushers] can be used for primary or secondary crushing. The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the [http://www.shibang-china.com/info/Jaw_crusher.html crusher]. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. The crusher illustrated is a suspended spindle type, meaning that the main shaft is suspended at the top and that the eccentric is mounted above the gear.
from:http://www.shibang-china.com/info/Cone_crusher.html

Cone Crushers

2007-08-26T08:31:59Z

Shibang jerry:

==Cone Crushers ==

This [http://www.shibang-china.com/info/Cone_crusher.html crusher] is suitable for crushing varies of mid-hard and above mid-hard ores and rocks. It has the advantage of reliable construction, high prod activity, easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the [http://www.shibang-china.com/info/Jaw_crusher.html crushing] chamber without damage to the [http://www.shibang-china.com/info/Cone_crusher.html crusher], use dry oil, water, two kinds of sealed formation. It makes plaster stone and engine oil separated, assured reliable performance.

==Cone Crushers Technology==
[http://www.shibang-china.com/info/Cone_crusher.html Cone crusher] is one of the main types of primary [http://www.shibang-china.com/info/Jaw_crusher.html jaw crushers] in a mine or ore processing plant. [http://www.shibang-china.com/info/Cone_crusher.html Cone crushers] are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Gyratory [http://www.shibang-china.com/info/Cone_crusher.html Cone crushers] can be used for primary or secondary crushing. The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the [http://www.shibang-china.com/info/Jaw_crusher.html crusher]. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. The crusher illustrated is a suspended spindle type, meaning that the main shaft is suspended at the top and that the eccentric is mounted above the gear.

Cone crusher

2007-08-24T11:25:53Z

Shibang jerry:

==Cone Crusher ==

[http://www.shibang-china.com/info/Cone_crusher.html Cone crusher] is similar in operation to a gyratory crusher, with less steepness in the crushing chamber and more of a parallel zone between crushing zones. A cone crusher breaks rock by squeezing the rock between an eccentrically gyrating spindle, which is covered by a wear resistant mantle, and the enclosing concave hopper, covered by a manganese concave or a bowl liner. As rock enters the top of the [http://www.shibang-china.com/info/Cone_crusher.html Cone crusher], it becomes wedged and squeezed between the mantle and the bowl liner or concave. Large pieces of ore are broken once, and then fall to a lower position (because they are now smaller) where they are broken again. This process continues until the pieces are small enough to fall through the narrow opening at the bottom of the crusher.

==Technology==

For the most part advances in crusher design have moved slowly. [http://www.shibang-china.com/info/Jaw_crusher.html Jaw crusher] have remained virtually unchanged for sixty years. More reliability and higher production have been added to basic [http://crusher.shibang-china.com/Cone_crusher.html Cone crusher] designs that have also remained largely unchanged. Increases in rotating speed, have provided the largest variation. For instance, a 48 inch (120 cm) [http://www.shibang-china.com/info/Cone_crusher.html Cone crusher] manufactured in 1960 may be able to produce 170 tons/hr of crushed rock, whereas the same size cone manufactured today may produce 300 tons/hr. These production improvements come from speed increases and better crushing chamber designs.
The largest advance in [http://crusher.shibang-china.com/Cone_crusher.html Cone crusher] reliability has been seen in the use of hydraulics to protect crushers from damage from uncrushable objects entering the crushing chamber. Foreign objects, such as steel, have been known to cost thousands of dollars of damage to a [http://www.shibang-china.com/info/Cone_crusher.html Cone crusher], and more costs in lost production. The advance of hydraulic relief systems has greatly reduced downtime and improved the life of these machines.