Substances | Limitations |
---|
Abietic acid | |
Acetone | |
Acetone-formaldehyde
condensate (CAS Reg. No. 25619-09-4) | |
Acetone-urea-formaldehyde resin | |
N-Acetyl ethanolamine | |
Acetyl tributyl citrate | |
Acetyl triethyl citrate | |
2-Acrylamido-2-methyl-propanesulfonic acid, homopolymer,
sodium salt (CAS Reg. No. 35641-59-9) | |
Albumin, blood | |
(2-Alkenyl) succinic
anhydrides in which the alkenyl groups are derived from olefins which
contain not less than 78 percent C30and higher groups (CAS
Reg. No. 70983-55-0) | |
4-[2-[2-2-(Alkoxy (C12-C15)
ethoxy) ethoxy]ethyl] disodium sulfosuccinate | |
1-Alkyl (C6-C18)
amino-3-amino-propane monoacetate | |
Alkylated (C4and/or C8) phenols | |
Alkyl (C7-C12) benzene | |
Alkyl (C10-C20)
dimethylbenzyl ammonium chloride | |
n-Alkyl(C12,
C14, C16, or C18) dimethyl
(ethylbenzyl) ammonium cyclohexylsulfamate | For use as preservative only. |
Alkyl ketene dimers as
described in 176.120 of this chapter | |
Alkyl (C7-C12) naphthalene | |
alphaOlefin sulfonate [alkyl group is
in the range of C10-C18with not less than 50
percent C14-C16], ammonium, calcium, magnesium,
potassium, and sodium salts | |
2-[(2-aminoethyl)amino]ethanol
(CAS Reg. No. 111-41-1) | |
3-Aminopropanediol | For use only in the preparation of
polyurethane resins. |
Aluminum | |
Aluminum acetate | |
Aluminum di(2-ethylhexoate) | |
Aluminum potassium silicate | |
N-[beta]-Aminoethyl-gamma-aminopropyl
trimethoxysilane | |
3-(Aminomethyl)-3,5,5-trimethylcyclohexylamine | |
Aminomethylpropanol | |
Ammonium benzoate | For
use as preservative only. |
Ammonium bifluoride | For use only as bonding agent for aluminum foil, stabilizer
or preservative. Total fluoride from all sources not to exceed 1
percent by weight of the finished adhesive. |
Ammonium borate | |
Ammonium citrate | |
Ammonium persulfate | |
Ammonium polyacrylate | |
Ammonium potassium hydrogen phosphate | |
Ammonium silico-fluoride | For use only as bonding agent for
aluminum foil, stabilizer, or preservative. Total fluoride from all
sources not to exceed 1 percent by weight of the finished adhesive. |
Ammonium sulfamate | |
Ammonium thiocyanate | |
Ammonium thiosulfate | |
Amyl acetate | |
Anhydroenneaheptitol | |
Animal glue as described in 178.3120 of this
chapter | |
2-Anthraquinone sulfonic
acid, sodium salt | For use only
as polymerization-control agent. |
Antimony oxide | |
Asbestos | |
Asphalt, paraffinic and
naphthenic | |
Azelaic acid | |
Azo-bis-isobutyronitrile | |
Balata rubber | |
Barium acetate | |
Barium peroxide | |
Barium sulfate | |
Bentonite | |
Benzene (benzol) | |
1,4-Benzenedicarboxylic acid,
bis[2-(1,1-dimethylethyl)-6-<3-(1,1-dimethylethyl)-2-hydroxy-5-methylphenyl]methyl]-4-methyl-phenyl]ester
(CAS Reg. No. 57569-40-1) | For
use as a stabilizer. |
1,2-Benzisothiazolin-3-one (CAS Registry No. 2634-33-5) | For use as preservative only. |
Benzothiazyldisulfide | |
p-Benzoxyphenol | For use as preservative only. |
Benzoyl peroxide | |
Benzyl alcohol | |
Benzyl benzoate | |
Benzyl bromoacetate | For use as preservative only. |
p-Benzyloxyphenol | Do. |
BHA (butylated
hydroxyanisole) | |
BHT (butylated
hydroxytoluene) | |
Bicyclo[2.2.1]hept-2-ene-6-methyl
acrylate | |
2-Biphenyl diphenyl
phosphate | |
Bis(benzoate-O)(2-propanolato)aluminum
(CAS Reg. No. 105442-85-1) | For
use only as a reactant in the preparation of polyester resins. |
1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hy-drazine
(CAS Reg. No. 32687-78-8) | For
use at a level not to exceed 2 percent by weight of the adhesive. |
1,3-Bis(2-benzothiazolylmercaptomethyl)
urea | |
4,4'-Bis([alpha],[alpha]-dimethylbenzyl)diphenylamine | |
2,6-Bis(1,1-dimethylethyl)-4-(1-methylpropyl)phenol
(CAS Reg. No. 17540-75-9) | For
use as an antioxidant and/or stabilizer only. |
2,6-Bis (1-methylheptadecyl)-p-cresol | |
4-<4,
6-Bis(octylthio)6-Bis(octylthio)6-Bis(octylthio)-s-triazin-2-yl]amino]-2,6-di-tert-butylphenol
(CAS Reg. No. 991-84-4) | |
Bis(tri-n-butyltin)
oxide | For use as preservative
only. |
Bis(trichloromethyl)sulfone
C.A. Registry No. 3064-70-8 |
Do. |
Borax | |
Boric acid | |
2-Bromo-2-nitro-1, 3-propanediol (CAS Reg. No. 52-51-7) | For use only as an antibacterial
preservative. |
Butanedioic acid, sulfo-1,4-di-(C9-C11alkyl)
ester, ammonium salt (also known as butanedioic acid,
sulfo-1,4-diisodecyl ester, ammonium salt [CAS Reg. No. 144093-88-9]). | For use as a surface active agent in
adhesives. |
1,3-Butanediol | |
1,4-Butanediol | |
1,4-Butanediol modified with adipic acid | |
Butoxy polyethylene polyproplyene glycol
(molecular weight 900-4,200) | |
Butyl acetate | |
Butyl acetyl ricinoleate | |
Butyl alcohol | |
Butylated reaction product ofp-cresol and
dicyclopentadiene | As identified
in 178.2010(b) of this chapter. |
Butylated, styrenated cresols identified in
178.2010(b) of this chapter | |
Butyl benzoate | |
Butyl benzyl phthalate | |
Butyldecyl phthalate | |
1,3-Butylene glycoldiglycolic acid copolymer | |
tert-Butyl hydroperoxide | |
4,4'-Butylidenebis(6-tert-butyl-m-cresol) | |
Butyl lactate | |
Butyloctyl phthalate | |
p-tert-Butylphenyl salicylate | |
Butyl phthalate butyl glycolate | |
p-tert-Butylpyrocatechol | For use only as polymerization-control
agent. |
Butyl
ricinoleate | |
Butyl rubber polymer | |
Butyl stearate | |
Butyl titanate, polymerized | |
Butyraldehyde | |
Calcium ethyl acetoacetate | |
Calcium nitrate | |
Calcium metasilicate | |
Camphor | |
Camphor fatty acid esters | |
Candelilla wax | |
epsilon-Caprolactam-(ethylene-ethyl acrylate)
graft polymer | |
Carbon black, channel
process | |
Carbon
disulfide-1,1'-methylenedipiperidine reaction product | |
Carbon tetrachloride | |
Carboxymethylcellulose | |
Castor oil, polyoxyethylated (4-84 moles ethylene oxide) | |
Cellulose acetate butyrate | |
Cellulose acetate propionate | |
Ceresin wax (ozocerite) | |
Cetyl alcohol | |
Chloracetamide | |
Chloral hydrate | |
Chlorinated liquidn-paraffins with
chain lengths of C10-C17, containing 40-70 percent
chlorine by weight | |
Chlorinated pyridine
mixture with active ingredients consisting of
2,3,5,6-tetrachloro-4-(methylsulfonyl) pyridine,
2,3,5,6-tetrachloro-4-(methylsulfinyl) pyridine and pentachloropyridine | For use as preservative only. |
Chlorinated rubber polymer
(natural rubber polymer containing approximately 67 percent chlorine) | |
1-(3-Chloroallyl)-3,5,7-triaza-1-azoniaadamantane
chloride | For use as
preservative only. |
Chlorobenzene | |
4-Chloro-3,5-dimethylphenol
(p-chloro-m-xylenol) | For use as preservative only. |
4-Chloro-3-methylphenol | Do. |
5-Chloro-2-methyl-4-isothiazolin-3-one
(CAS Reg. No. 26172-55-4) and 2-methyl-4-isothiazolin-3-one (CAS Reg.
No. 2682-20-4) mixture at a ratio of 3 parts to 1 part, manufactured
from methyl-3-mercaptopropionate (CAS Reg. No. 2935-90-2). The mixture
may contain magnesium nitrate (CAS Reg. No. 10377-60-3) at a
concentration equivalent to the isothiazolone active ingredients
(weight/weight) | For use only as
an antimicrobial agent in polymer latex emulsions. |
Chloroform | |
Chloroprene | |
Chromium caseinate | |
Chromium nitrate | |
Chromium potassium sulfate | |
Cobaltous acetate | |
Coconut fatty acid amine salt of tetrachlorophenol | For use as preservative only. |
Copal | |
Copper 8-quinolinolate | For use as preservative only. |
Coumarone-indene resin | |
Cresyl diphenyl phosphate | |
Cumene hydroperoxide | |
Cyanoguanidine | |
Cyclized rubber as
identified in 176.170(b)(2) of this chapter | |
Cyclohexane | |
1,4-Cyclohexanedimethanoldibenzoate
(CAS Reg. No. 35541-81-2) | |
Cyclohexanol | |
Cyclohexanone resin | |
Cyclohexanone-formaldehyde condensate | |
N-Cyclohexylp-toluene
sulfonamide | |
([eta]5-Cyclopentadienyl)-([eta]6-isopropylbenzene)iron(II)
hexafluorophosphate (CAS Reg. No. 32760-80-8) | For use only as a photoinitiator. |
Damar | |
Defoaming agents as described in 176.210 of
this chapter | |
Dehydroacetic acid | |
Diacetone alcohol | |
Diacetyl peroxide | |
N,N'-Dialkoyl-4,4'-diaminodiphenylmethane
mixtures where; the alkoyl groups are derived from marine fatty acids
(C12-C24) | |
2,5-Di-tert-amylhydroquinone | |
Diamines derived from dimerized vegetable oil
acids | |
Diaryl-p-phenylenediamine,
where the aryl group may be phenyl, tolyl, or xylyl | |
1,2-Dibromo-2,4-dicyanobutane (CAS Registry No.
3569-65-7) | For use as a
preservative only. |
2,2-Dibromo-3-nitrilopropionamide (CAS Reg. No.
10222-01-2). | For use as a
preservative only. |
Di(butoxyethyl) phthalate | |
2,5-Di-tert-butylhydroquinone | |
Dibutyl maleate | |
2,6-Di-tert-butyl-4-methylphenol | For use as preservative only. |
Di(C7, C9-alkyl)adipate | |
Dibutyl phthalate | |
Dibutyl sebacate | |
Dibutyltin dilaurate for
use only as a catalyst for polyurethane resins | |
1,2-Dichloroethylene (mixed isomers) | |
Dicumyl peroxide | |
Dicyclohexyl phthalate | |
Diethanolamine | |
Diethanolamine condensed
with animal or vegetable fatty acids | |
Diethylamine | |
Diethylene glycol | |
Diethylene glycol adipic acid copolymer | |
Diethylene glycol dibenzoate | |
Diethylene glycol hydrogenated tallowate
monoester | |
Diethylene glycol laurate | |
Diethylene glycol monobutyl ether | |
Diethylene glycol monobutyl ether acetate | |
Diethylene glycol monoethyl ether | |
Diethylene glycol monoethyl ether acetate | |
Diethylene glycol monomethyl ether | |
Diethylene glycol monooleate | |
Diethylene glycol monophenyl ether | |
Diethylene glycol copolymer of adipic acid and
phthalic anhydride | |
Di(2-ethylhexyl) adipate | |
Di(2-ethylhexyl)hexahydrophthalate | |
Di(2-ethylhexyl)phthalate | |
Diethyl oxalate | |
Diethyl phthalate | |
Dihexyl phthalate | |
Dihydroabietylphthalate | |
Di(2-hydroxy-5-tert-butylphenyl)
sulfide | |
2,2'-Dihydroxy-5,5'-dichlorodiphenylmethane
(dichlorophene) | |
4,5-Dihydroxy-2-imidazolidinone | |
4-(Diiodomethylsulfonyl) toluene CA Registry
No.: 20018-09-01 | For use as an
antifungal preservative only. |
Diisobutyl adipate | |
Diisobutyl ketone | |
Diisobutylphenoxyethoxyethyl
dimethyl benzyl ammonium chloride | |
Diisobutyl phthalate | |
Diisodecyl adipate | |
Diisodecyl phthalate | |
Diisooctyl phthalate | |
Diisopropylbenzene hydroperoxide | |
N,N-Dimethylcyclohexylamine dibutyldithiocarbamate | |
Dimethyl formamide | |
Dimethyl hexynol | |
2,2-Dimethyl-1,3-propanediol
dibenzoate | |
Dimethyl octynediol | |
N-(1,1-dimethyl-3-oxobutyl) acrylamide | |
Dimethyl phthalate | |
3,5-Dimethyl-1,3,5,2H-tetrahydrothiadiazine-2-thione | For use as preservative only. |
Di-[beta]-naphthyl-p-phenylenediamine | |
4,6-Dinonyl-o-cresol | |
Dinonylphenol | |
Di-n-octyldecyl adipate | |
Dioctyldiphenylamine | |
Dioctylphthalate | |
Dioctylsebacate | |
Dioxane | |
Dipentaerythritol
pentastearate | |
Dipentamethylene-thiuram-tetrasulfide | |
Dipentene | |
Dipentene resins | |
Dipentene-beta-pinene-styrene
resins | |
Dipentene-styrene resin (CAS
Registry No. 64536-06-7) | |
Diphenyl-2-ethylhexyl
phosphate | |
Diphenyl, hydrogen ated | |
N,N'-Diphenyl-p-phenylenediamine | |
Diphenyl phthalate | |
1,3-Diphenyl-2-thiourea | |
Dipropylene glycol | |
Dipropylene glycol
dibenzoate | |
Dipropylene glycol
monomethyl ether | |
Dipropylene glycol
copolymer of adipic acid and phthalic anhydride | |
Disodium cyanodithioimidocarbonate | |
Disodium 4-isodecyl sulfosuccinate (CAS Reg.
No. 37294-49-8) | |
N,N'-Distearoylethylenediamine | |
Distearyl thiodipropionate | |
3,5-Di-tert-butyl-4-hydroxyhydrocinnamic
acid triester with 1,3,5-tris(2-hydroxyethyl)-s-triazine-2,4,6(1H,3H,5H)-trione | For use as antioxidant only. |
4,4'-Dithiodimorpholine | |
n-Dodecylmercaptan | |
tert-Dodecylmercaptan | |
Dodecylphenoxybenzene-disulfonic acid and/or
its calcium, magnesium, and sodium salts | |
Elemi gum | |
Epichlorohydrin-4,4'-isopropylidenediphenol
resin | |
Epichlorohydrin-4,4'-sec-butylidenediphenol
resin | |
Epichlorohydrin-4,4'-isopropylidene-di-o-cresol
resin | |
Epichlorohydrin-phenolformaldehyde
resin | |
Erucamide (erucylamide) | |
Ethanolamine | |
Ethoxylated primary linear alcohols of greater than 10
percent ethylene oxide by weight having molecular weights of 390 to
7,000 (CAS Reg. No. 97953-22-5) | |
Ethoxypropanol butyl ether | |
Ethyl alcohol (ethanol) | |
5-Ethyl-1,3-diglycidyl-5-methylhydantoin (CAS
Reg. No. 15336-82-0) | |
Ethylene-acrylic
acid-carbon monoxide copolymer (CAS Reg. No. 97756-27-9) | |
Ethylene-acrylic acid copolymer, partial sodium
salt containing no more than 20 percent acrylic acid by weight, and no
more than 16 percent of the acrylic acid as the sodium salt (CAS Reg.
No. 25750-82-7) | |
Ethylenediamine | |
Ethylenediaminetetra-acetic acid, calcium,
ferric, potassium, or sodium salts, single or mixed | |
Ethylene dichloride | |
Ethylene glycol | |
Ethylene glycol monobutyl
ether | |
Ethylene glycol monobutyl
ether acetate | |
Ethylene glycol monoethyl
ether | |
Ethylene glycol monoethyl
ether acetate | |
Ethylene glycol monoethyl
ether ricinoleate | |
Ethylene glycol monomethyl
ether | |
Ethylene glycol monophenyl
ether | |
Ethylene-carbon monoxide
copolymer (CAS Reg. No. 25052-62-4) containing not more than 30 weight
percent of the units derived from carbon monoxide | |
Ethylene-maleic anhydride copolymer, ammonium
or potassium salt | |
Ethylene-methacrylic acid
copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or
zinc | |
Ethylene-methacrylic
acid-vinyl acetate copolymer partial salts: Ammonium, calcium,
magnesium, sodium, and/or zinc | |
Ethylene-octene-1
copolymers containing not less than 70 weight percent ethylene (CAS Reg.
No. 26221-73-8) | |
Ethylene-propylene-dicyclopentadiene
copolymer rubber | |
Ethylene, propylene,
1,4-hexadiene and 2,5-norbornadiene tetrapolymer | |
Ethylene-vinyl acetate carbon monoxide
terpolymer (CAS Registry No. 26337-35-9) containing not more than 15
weight percent of units derived from carbon monoxide | |
2,2'-Ethylidenebis (4,6-di-tert-butylphenol)
(CAS Reg. No. 35958-30-6) | |
Ethyl-p-hydroxybenzoate | For use as preservative only. |
Ethyl hydroxyethylcellulose | |
Ethyl lactate | |
2,2'-Ethylidenebis(4,6-di-tert-butylphenyl)fluorophosphonite
(CAS Reg. No. 118337-09-0) | For
use as an antioxidant and/or stabilizer only. |
Ethyl phthalyl ethyl
glycolate | |
Ethyl-p-toluene
sulfonamide | |
Fats and oils derived from
animal or vegetable sources, and the hydrogenated, sulfated, or
sulfonated forms of such fats and oils | |
Fatty acids derived from animal or vegetable fats and oils;
and salts of such acids, single or mixed, as follows: | |
Aluminum | |
Ammonium | |
Calcium | |
Magnesium | |
Potassium | |
Sodium | |
Zinc | |
Ferric chloride | |
Fluosilicic acid (hydrofluosilicic acid) | For use only as bonding agent for
aluminum foil, stabilizer, or preservative. Total fluoride from all
sources not to exceed 1 percent by weight of the finished adhesive. |
Formaldehyde | |
Formaldehydeo-andp-toluene
sulfonamide | |
Formamide | |
Fumaratochromium (III) nitrate | |
Furfural | |
Furfuryl alcohol | |
Fumaric acid | |
gamma-Aminopropyltrimethoxysilane (CAS
Reg. No. 13822-56-5) | |
Glutaraldehyde | |
Glycerides, di- and monoesters | |
Glycerol polyoxypropylene triol, minimum
average molecular weight 250 (CAS Reg. No. 25791-96-2) | For use only in the preparation of
polyester and polyurethane resins in adhesives. |
Glyceryl borate (glycol
boriborate resin) | |
Glyceryl ester of damar,
copal, elemi, and sandarac | |
Glyceryl monobutyl
ricinoleate | |
Glyceryl monohydroxy
stearate | |
Glyceryl monohydroxy
tallowate | |
Glyceryl polyoxypropylene
triol (average molecular weight 1,000) | |
Glyceryl tribenzoate | |
Glycol diacetate | |
Glyoxal | |
Heptane | |
Hexamethylenetetramine | |
Hexane | |
Hexanetriols | |
Hexylene glycol | |
Hydroabietyl alcohol | |
Hydrocarbon resins (produced by polymerization of mixtures
of mono- and di-unsaturated hydrocarbons of the aliphatic, alicyclic,
and monobenzenoid type derived both from cracked petroleum and terpene
stocks) (CAS Reg. No. 68239-99-6) | |
Hydrocarbon resins (produced by the polymerization of
styrene andalpha-methyl styrene), hydrogenated (CAS Reg. No.
68441-37-2) | |
Hydrofluoric acid | For use only as bonding agent for
aluminum foil, stabilizer, or preservative. Total fluoride from all
sources not to exceed 1 percent by weight of the finished adhesive. |
Hydrogen peroxide | |
Hydrogenated dipentene resin (CAS Reg. No.
106168-39-2) | |
Hydrogenated
dipentene-styrene copolymer resin (CAS Reg. No. 106168-36-9) | |
Hydrogenated-beta-pinene-alpha-pinene-dipentene
copolymer resin (CAS Reg. No. 106168-37-0) | |
a-Hydro-omega-hydroxypoly-(oxytetramethylene) | For use only in the preparation of
polyurethane resins. |
Hydroquinone | |
Hydroquinone monobenzyl
ether | |
Hydroquinone monoethyl ether | |
2(2'-Hydroxy-3',5' di-tert-amylphenyl)
benzotriazole | |
Hydroxyacetic acid | |
7-Hydroxycoumarin | |
Hydroxyethylcellulose | |
2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone(CAS
Reg. No. 106797-53-9) | For use
only as a photoinitiator at a level not to exceed 5 percent by weight of
the adhesive. |
1-(2-Hydroxyethyl)-1-(4-chlorobutyl)-2 alkyl (C6-C17)
imidazolinium chloride | |
Hydroxyethyldiethylenetriamine | |
[beta]-Hydroxyethyl pyridinium
2-mercaptobenzothiazol | |
Hydroxyethyl starch | |
Hydroxyethylurea | |
Hydroxylamine sulfate | |
5-Hydroxymethoxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane,
5-hydroxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, and
5-hydroxypoly-[methyleneoxy]methyl-1-aza-3,7-dioxabicyclo[3.3.0] octane
mixture | For use only as an
antibacterial preservative. |
Hydroxypropyl methylcellulose | |
2-(Hydroxymethyl)-2-methyl-1,3-propanediol
tribenzoate | |
2-Imidazolidinone | |
3-Iodo-2-propynyl-N-butyl carbamate (CAS Reg.
No. 55406-53-6) | For use only as
an antifungal preservative. |
Iodoform | For use only as polymerization-control agent. |
Isoascorbic acid | |
Isobutyl alcohol (isobutanol) | |
Isobutylene-isoprene copolymer | |
Isodecyl benzoate (CAS Reg. No. 131298-44-7) | |
Isophorone | |
Isopropanolamine (mono-, di-, tri-) | |
Isopropyl acetate | |
Isopropyl alcohol (isopropanol) | |
Isopropyl-m-andp-cresol (thymol derived) | |
4,4'-Isopropylidenediphenol | |
4,4'-Isopropylidenediphenol, polybutylated
mixture | For use as preservative
only. |
Isopropyl
peroxydicarbonate | |
p-Isopropoxy
diphenylamine | |
4,4'-Isopropylidene-bis(p-phenyleneoxy)-di-2-propanol | |
Itaconic acid | |
Japan wax | |
Kerosene | |
Lauroyl peroxide | |
Lauroyl sulfate salts: | |
Ammonium | |
Magnesium | |
Potassium | |
Sodium | |
Lauryl alcohol | |
Lauryl pyridinium 5-chloro-2-mercaptobenzothiazole | |
Lignin calcium sulfonate | |
Lignin sodium sulfonate | |
Linoleamide (linoleic acid amide) | |
Magnesium fluoride | For use only as bonding agent for aluminum foil,
stabilizer, or preservative. Total fluoride from all sources not to
exceed 1 percent by weight of the finished adhesives. |
Magnesium glycerophosphate | |
Maleic acid | |
Maleic anhydride-diisobutylene copolymer, ammonium or
sodium salt | |
Manganese acetate | |
Marine oil fatty acid soaps, hydrogenated | |
Melamine | |
Melamine-formaldehyde copolymer | |
2-Mercaptobenzothiazole | |
2-Mercaptobenzothiazole and dimethyl dithiocarbamic acid
mixture, sodium salt | For use as
preservative only. |
2-Mercaptobenzothiazole, sodium or zinc salt | For use as preservative only. |
Methacrylate-chromic
chloride complex, ethyl or methyl ester | |
p-Menthane hydroperoxide | |
Methyl acetate | |
Methyl acetyl ricinoleate | |
Methyl alcohol (methanol) | |
Methylcellulose | |
Methylene chloride | |
4,4'-Methylenebis(2,6-di-tert-butylphenol) | |
2,2-Methylenebis (4-ethyl-6-tert-butylphenol) | |
2,2-Methylenebis (4-methyl-6-nonylphenol) | |
2,2-Methylenebis (4-methyl-6-tert-butylphenol) | |
Methyl ethyl ketone | |
Methyl ethyl ketone-formaldehyde condensate | |
2-Methylhexane | |
1-Methyl-2-hydroxy-4-isopropyl benzene | |
Methyl isobutyl ketone | |
Methyl oleate | |
Methyl oleate-palmitate mixture | |
Methyl phthalyl ethyl glycolate | |
Methyl ricinoleate | |
Methyl salicylate | |
a-Methylstyrene-vinyltoluene copolymer
resins (molar ratio 1amethylstyrene to 3 vinyltoluene) | |
Methyl tallowate | |
Mineral oil | |
Monochloracetic acid | |
Monooctyldiphenylamine | |
Montan wax | |
Morpholine | |
Myristic acid-chromic
chloride complex | |
Myristyl alcohol | |
Naphtha | |
Naphthalene, monosulfonated | |
Naphthalene sulfonic acid-formaldehyde
condensate, sodium salt | |
[alpha]-Naphthylamine | |
[alpha],[alpha]',[alpha][Prime],[alpha][Prime]'-Neopentane
tetrayltetrakis <[em>omega-hydroxypoly (oxypropylene) (1-2
moles)], average molecular weight 400 | |
Nitric acid | |
[micro]-Nitrobiphenyl | |
Nitrocellulose | |
2-Nitropropane | |
[alpha]-(p-Nonylphenyl)-omega-hydroxypoly
(oxyethylene) mixture of dihydrogen phosphate and monohydrogen
phosphate esters; the nonyl group is a propylene trimer isomer and the
poly (oxyethylene) content averages 6-9 moles or 50 moles | |
[alpha](p-Nonylphenyl)-omega-hydroxypoly
(oxyethylene) produced by the condensation of 1 mole ofp-nonylphenol
(nonyl group is a propylene trimer isomer) with an average of 1-40
moles of ethylene oxide | |
[alpha]-(p-Nonylphenyl)-omega-hydroxypoly
(oxyethylene) sulfate, ammonium salt: the nonyl group is a propylene
trimer isomer and the poly (oxyethylene) content averages 9 or 30 moles | |
endo-cis-5-Norbornene-2,3-dicarboxylic
anhydride | |
[alpha]-cis-9-Octadecenyl-omega-hydroxypoly
(oxyethylene); the octadecenyl group is derived from oleyl alcohol and
the poly (oxyethylene) content averages 20 moles | |
Octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate | |
Octyl alcohol | |
Octyldecyl phthalate | |
Octylphenol | |
Octylphenoxyethanols | |
Octylphenoxypolyethoxy-polypropoxyethanol (13
moles of ethylene oxide and propylene oxide) | |
Odorless light petroleum hydrocarbons | |
Oleamide (oleic acid amide) | |
Oleic acid, sulfated | |
2,2'-Oxamidobis[ethyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]
(CAS Reg. No. 70331-94-1) | |
Oxazoline | |
[alpha]-(oxiranylmethyl)-[omega]-(oxiranylmethoxy)poly[oxy(methyl-1,2-ethanediyl)],
(alternative name: epichlorohydrin-polypropylene glycol) (CAS Reg. No.
26142-30-3) | For use as a
reactant in the preparation of epoxy-based resins. |
2,2'-[oxybis[(methyl-2,1-ethanediyl)-oxymethylene>bisoxirane,
(alternative name: epichlorohydrin-dipropylene glycol) (CAS Reg. No.
41638-13-5) | For use as a
reactant in the preparation of epoxy-based resins. |
n-Oxydiethylene-benzothiazole | |
Palmitamide (palmitic acid amide) | |
Paraffin (C12-C20)
sulfonate | |
Paraformaldehyde | |
Pentachlorophenol | |
Pentaerythritol ester of maleic anhydride | |
Pentaerythritol monostearate | For use as preservative only. |
Pentaerythritol
tetrabenzoate [CAS Registry No. 4196-86-5] | |
Pentaerythritol tetrastearate | |
2,4-Pentanedione | |
Pentasodium
diethylenetriaminepentaacetate (CAS Reg. No. 140-01-2) | |
Perchloroethylene | |
Petrolatum | |
Petroleum hydrocarbon resin
(cyclopentadiene type), hydrogenated | |
Petroleum hydrocarbon resin (produced by the catalytic
polymerization and subsequent hydrogenation of styrene, vinyltoluene,
and indene types from distillates of cracked petroleum stocks) | |
Petroleum hydrocarbon resins (produced by the
homo-and copolymerization of dienes and olefins of the aliphatic,
alicyclic, and monobenzenoid arylalkene types from distillates of
cracked petroleum stocks) | |
Phenol | For use as preservative only. |
Phenol-coumarone-indene
resin | |
Phenolic resins as described
in 175.300(b)(3)(vi) | |
Phenothiazine | For use only as polymerization-control
agent. |
Phenyl-[beta]-naphthylamine
(free of [beta]-naphthylamine) | |
o-Phenylphenol | For use as preservative only. |
o-Phthalic acid | |
Pimaric acid | |
Pine oil | |
Piperazine | |
Piperidinium pentamethylenedithiocarbamate | |
Poly(acrylamide-[2-acrylamide-2-methylpropylsulfonate]-dimethylidiallyl
ammonium chloride) sodium salt (CAS Reg. No. 72275-68-4) | |
Polyamides derived from reaction of one or more
of the following acids with one or more of the following amines: | |
Acids: | |
Azelaic acid | |
Dimerized vegetable
oil acids | |
Amines: | |
Bis(hexamethylene)
triamine and higher homologues | |
Diethylenetriamine | |
Diphenylamine | |
Ethylenediamine | |
Hexamethylenediamine | |
Poly(oxypropylene)diamine
(weight average molecular weight 2010) (CAS Reg. No. 9046-10-0) | |
Poly(oxypropylene)diamine
(weight average molecular weight 440) (CAS Reg. No. 9046-10-0) | |
Tetraethylenepentamine | |
Triethylenetetramine | |
Polybutene, hydrogenated | |
Polybutylene glycol (molecular weight 1,000) | |
Poly [2(diethylamino) ethyl methacrylate]
phosphate | |
Polyester of adipic acid,
phthalic acid, and propylene glycol, terminated with butyl alcohol | |
Polyester of diglycolic acid and propylene
glycol containing ethylene glycol monobutyl ether as a chain stopper | |
Polyester resins (including alkyd type), as the
basic polymer, formed as esters when one or more of the following acids
are made to react with one or more of the following alcohols: | |
Acids: | |
Azelaic acid | |
Dimethyl
1,4-cyclohexanedicarboxylate (CAS Reg. No. 94-60-0) | |
Dimethyl-5-sulfoisophthalic
acid (CAS Reg. No. 50975-82-1) and/or its sodium salt (CAS Reg. No.
3965-55-7) | |
Polybasic
and monobasic acids identified in 175.300(b)(3)(vii)(a) and (b) | |
5-sulfo-1,3-benzenedicarboxylic
acid, monosodium salt (CAS Reg. No. 6362-79-4) | |
Tetrahydrophthalic
acid | |
Alcohols: | |
1,4-Cyclohexanedimethanol | |
2,2-Dimethyl-1,3-propanediol | |
1,6-Hexanediol (CAS
Reg. No. 629-11-8) | |
Polyhydric
and monohydric alcohols identified in 175.300(b)(3)(vii)(c)
and (d) | |
Polyethyleneadipate
modified with ethanolamine with the molar ratio of the amine to the
adipic acid less than 0.1 to 1 | For
use only in the preparation of polyurethan resins. |
Polyethylene glycol
(molecular weight 200-6,000) | |
Polyethylene glycol
mono-isotridecyl ether sulfate, sodium salt (CAS Reg. No. 150413-26-6) | |
Polyethyleneglycol alkyl(C10-C12)ether
sulfosuccinate, disodium salt (CAS Reg. No. 68954-91-6) | |
Polyethylene, oxidized | |
Polyethylene resins, carboxyl modified,
identified in 177.1600 of this chapter | |
Polyethylenimine | |
Polyethylenimine-epichlorohydrin
resins | |
Poly(ethyloxazoline) (CAS
Reg. No. 25805-17-8) | |
Polyisoprene | |
Polymeric esters of polyhydric alcohols and
polycarboxylic acids prepared from glycerin and phthalic anhydride and
modified with benzoic acid, castor oil, coconut oil, linseed oil, rosin,
soybean oil, styrene, and vinyl toluene | |
Polymers: Homopolymers and copolymers of the following
monomers: | |
Acrylamide | |
Acrylic acid | |
Acrylonitrile | |
Allylmethacrylate
(CAS Reg. No. 00096-05-09) | |
Butadiene | |
Butene | |
N-tert-Butylacrylamide | |
Butyl acrylate | |
1,3-Butylene glycol
dimethacrylate | |
Butyl
methacrylate | |
Crotonic
acid | |
Decyl
acrylate | |
Diallyl
fumarate | |
Diallyl
maleate | |
Diallyl
phthalate | |
Dibutyl
fumarate | |
Dibutyl
itaconate | |
Dibutyl
maleate | |
Di(2-ethylhexyl)
maleate | |
Dimethyl-[alpha]-methylstyrene | |
Dioctyl fumarate | |
Dioctyl maleate | |
Divinylbenzene | |
Ethyl acrylate | |
Ethylene | |
Ethylene cyanohydrin | |
2-Ethylhexyl
acrylate | |
Ethyl
methacrylate | |
Fatty
acids, C10-13-branched, vinyl esters (CAS Reg. No.
184785-38-4) | |
Fumaric
acid and/or its methyl, ethyl, propyl, butyl, amyl hexyl, heptyl and
octyl esters | |
Glycidyl
methacrylate | |
1-Hexene
(CAS Reg. No. 592-41-6) | |
2-Hydroxyethyl
acrylate | |
2-Hydroxyethyl
methacrylate | |
2-Hydroxypropyl
methacrylate | |
Isobutyl
acrylate | |
Isobutylene | |
Itaconic acid | |
Maleic acid, diester
with 2-hydroxyethanesulfonic acid, sodium salt | |
Maleic anhydride | |
Methacrylic acid | |
Methyl acrylate | |
N,N'-Methylenebisacrylamide | |
Methyl methacrylate | |
N-Methylolacrylamide | |
Methyl styrene | |
-Methyl styrene | |
Monoethyl maleate | |
Monomethyl maleate | |
Mono (2-ethylhexyl)
maleate | |
5-Norbornene-2
3-dicarboxylic acid, mono-n-butyl ester | |
1-Octene (CAS Reg.
No. 111-66-0) | |
Propyl
acrylate | |
Propylene | |
Styrene | |
Triallyl cyanurate | |
Vinyl acetate | |
Vinyl alcohol (from
alcoholysis or hydrolysis of vinyl acetate units) | |
Vinyl butyrate | |
Vinyl chloride | |
Vinyl crotonate | |
Vinyl ethyl ether | |
Vinyl hexoate | |
Vinylidene chloride | |
Vinyl methyl ether | |
Vinyl pelargonate | |
Vinyl propionate | |
Vinyl pyrrolidone | |
Vinyl stearate | |
Polyoxyalkylated-phenolic resin (phenolic resin
obtained from formaldehyde plus butyl- and/or amylphenols, oxyalkylated
with ethylene oxide and/or propylene oxide) | |
Poly(oxycaproyl) diols and triols (minimum molecular weight
500) | |
Polyoxyethylated (40 moles)
tallow alcohol sulfate, sodium salt | |
Polyoxyethylene (20 mol)--anhydrous lanolin adduct | |
Polyoxyethylene (molecular weight 200)
dibenzoate | |
Polyoxyethylene (molecular
weight 200-600) esters of fatty acids derived from animal or vegetable
fats and oils (including tall oil) | |
Polyoxyethylene (15 moles) ester of rosin | |
Polyoxyethylene (4-5 moles) ether of phenol | |
Polyoxyethylene (25 moles)--glycerol adduct | |
Polyoxyethylene (40 moles) stearate | |
Polyoxyethylene (5-15 moles) tridecyl alcohol | |
Polyoxypropylene (3 moles) tridecyl alcohol
sulfate | |
Polyoxypropylene (20 moles)
butyl ether | |
Polyoxypropylene (40 moles)
butyl ether | |
Polyoxypropylene (20 moles)
oleate butyl ether | |
Polyoxypropylene-polyoxyethylene
condensate (minimum molecular weight 1,900) | |
Polypropylene glycol (minimum molecular weight 150) | |
Polypropylene glycol (3-4 moles) triether with
2-ethyl-2-(hydroxymethyl)-1,3-propane-diol, average molecular weight 730 | |
Polypropylene glycol dibenzoate (CAS Reg. No.
72245-46-6) | For use as a
plasticizer at levels not to exceed 20 percent by weight of the finished
adhesive. |
Polypropylene,
noncrystalline | |
Polysiloxanes: | |
Diethyl polysiloxane | |
Dihydrogen
polysiloxane | |
Dimethyl
polysiloxane | |
Diphenyl
polysiloxane | |
Ethyl
hydrogen polysiloxane | |
Ethyl
phenyl polysiloxane | |
Methyl
ethyl polysiloxane | |
Methyl
hydrogen polysiloxane | |
Methyl
phenyl polysiloxane | |
Phenyl
hydrogen polysiloxane | |
Polysorbate 60 | |
Polysorbate 80 | |
Polysorbate 20 (polyoxyethylene (20) sorbitan monolaurate) | |
Polysorbate 40 (polyoxyethylene (20) sorbitan
monopalmitate) | |
Poly[styrene-co-disodium
maleate-co-[alpha]-(p-nonyl-phenyl)-omega-(p-vinyl-benzyl)poly(oxyethylene)]
terpolymer | |
Polytretrafluoroethylene | |
Polyurethane resins produced by: (1) reacting
diisocyanates with one or more of the polyols or polyesters named in
this paragraph, or (2) reacting the chloroformate derivatives of one or
more of the polyols or polyesters named in this paragraph with one or
more of the polyamines named in this paragraph, or (3) reacting toluene
diisocyanate or 4,4' methylenebis(cyclohexylisocyanate) (CAS Reg. No.
5124-30-1) with: (i) one or more of the polyols or polyesters named in
this paragraph and with eitherN-methyldiethanolamine (CAS Reg.
No. 105-59-9) and dimethyl sulfate (CAS Reg. No. 77-78-1) or
dimethylolpropionic acid (CAS Reg. No. 4767-03-7) and triethylamine (CAS
Reg. No. 121-44-8), or (ii) a fumaric acid-modified polypropylene
glycol or fumaric acid-modified tripropylene glycol), triethylamine (CAS
Reg. No. 107-15-3), and ethylenediamine (CAS Reg. No. 121-44-8), or (4)
reactingmeta-tetramethylxylene diisocyanate (CAS Reg. No.
2778-42-9) with one or more of the polyols and polyesters listed in this
paragraph and with dimethylolpropionic acid (CAS Reg. No. 4767-03-7)
and triethylamine (CAS Reg. No. 121-44-8),N-methyldiethanolamine
(CAS Reg. No. 105-59-9), 2-dimethylaminoethanol (CAS Reg. No.
108-01-0), 2-dimethylamino-2-methyl-1-propanol (CAS Reg. No. 7005-47-2),
and/or 2-amino-2-methyl-1-propanol (CAS Reg. No. 124-68-5) | |
Polyvinyl alcohol modified so as to contain not
more than 3 weight percent of comonomer units derived from 1-alkenes
having 12 to 20 carbon atoms | |
Polyvinyl butyral | |
Polyvinyl formal | |
Potassium ferricyanide | For use only as polymerization-control agent. |
PotassiumN-methyldithiocarbamate | |
Potassium pentachlorophenate | For use as preservative only. |
Potassium permanganate | |
Potassium persulfate | |
Potassium phosphates (mono-, di-, tribasic) | |
Potassium tripolyphosphate | |
[alpha], [alpha]',
[alpha][Prime]-1,2,3-Propanetriyltris
<[em>omega-(2,3-epoxypropoxy) poly (oxypropylene) (24 moles)] | |
[beta]-Propiolactone | |
Propyl alcohol (propanol) | |
Propylene carbonate | |
Propylene glycol andp-p'-isopropylidenediphenol
diether | |
Propylene glycol dibenzoate
(CAS Reg. No. 19224-26-1) | For
use as a plasticizer at levels not to exceed 20 percent by weight of the
finished adhesive. |
Propylene glycol esters of coconut fatty acids | |
Propylene glycol monolaurate | |
Propylene glycol monomethyl ether | |
Propylene glycol monostearate | |
[alpha], [alpha]',
[alpha][Prime]-[Propylidynetris (methylene)] tris
<[em>omega-hydroxypoly (oxypropylene) (1.5 moles minimum)],
minimum molecular weight 400 | |
Quaternary ammonium
chloride (hexadecyl, octadecyl derivative) | For use as preservative only. |
Rosin (wood, gum, and tall
oil rosin), rosin dimers, decarboxylated rosin (including rosin oil,
disproportionated rosin, and these substances as modified by one or more
of the following reactants: | |
Alkyl
(C1-C9) phenolformaldehyde | |
Ammonia | |
Ammonium caseinate-p-Cyclohexylphenolformaldehyde | |
Diethylene glycol | |
Dipentaerythritol | |
Ethylene glycol | |
Formaldehyde | |
Fumaric acid | |
Glycerin | |
Hydrogen | |
Isophthalic acid | |
4,4'-Isopropylidenediphenol-epichlorohydrin
(epoxy) | |
4,4'-Isopropylidenediphenol-formaldehyde | |
Maleic anhydride | |
Methyl alcohol | |
Pentaerythritol | |
Phthalic anhydride | |
Polyethylene glycol | |
Phenol-formaldehyde | |
Phenyl
[mu]-cresol-formaldehyde | |
p-Phenylphenol-formaldehyde | |
Sulfuric acid | |
Triethylene glycol | |
Xylenol-formaldehyde | |
Rosin salts (salts of wood, gum, and tall oil
rosin, and the dimers thereof, decarboxylated rosin disproportionated
rosin, hydrogenated rosin): | |
Aluminum | |
Ammonium | |
Calcium | |
Magnesium | |
Potassium | |
Sodium | |
Zinc | |
Rosin, gasoline-insoluble fraction | |
Rubber hydrochloride polymer | |
Rubber latex, natural | |
Salicylic acid | For use as preservative only. |
Sandarac | |
Sebacic acid | |
Shellac | |
Silicon dioxide as defined
in 172.480(a) of this chapter | |
Sodium alkyl (C2-C13.5aliphatic)
benezenesulfonate | |
Sodium aluminum
pyrophosphate | |
Sodium aluminum sulfate | |
Sodium bisulfate | |
Sodium calcium silicate | |
Sodium capryl polyphosphate | |
Sodium carboxymethylcellulose | |
Sodium chlorate | |
Sodium chlorite | |
Sodium chromate | |
Sodium decylsulfate | |
Sodium dehydroacetate | For use as preservative only. |
Sodium di-(2-ethylhexoate) | |
Sodium di-(2-ethylhexyl) pyrophosphate | |
Sodium dihexylsulfosuccinate | |
Sodium dissobutylphenoxydiethoxyethyl sulfonate | |
Sodium diisobutylphenoxymonoethoxyethyl
sulfonate | |
Sodium diisopropyl- and
triisopropylnaphthalenesulfonate | |
Sodium
dimethyldithiocarbamate | |
Sodium
dioctylsulfosuccinate | |
Sodiumn-dodecylpolyethoxy
(50 moles) sulfate | |
Sodium ethylene ether of
nonylphenol sulfate | |
Sodium 2-ethylhexyl sulfate | |
Sodium fluoride | For use only as bonding agent for aluminum foil,
stabilizer, or preservative. Total fluoride for all sources not to
exceed 1 percent by weight of the finished adhesive. |
Sodium formaldehyde
sulfoxylate | |
Sodium formate | |
Sodium heptadecylsulfate | |
Sodium hypochlorite | |
Sodium isododecylphenoxypolyethoxy (40 moles) sulfate | |
SodiumN-lauroyl sarcosinate | |
Sodium metaborate | |
Sodium [alpha]-naphthalene sulfonate | |
Sodium nitrate | |
Sodium nitrite | |
Sodium oleoyl
isopropanolamide sulfosuccinate | |
Sodium pentachlorophenate | For use as preservative only. |
Sodium perborate | |
Sodium persulfate | |
Sodium [mu]-phenylphenate | For use as preservative only. |
Sodium polyacrylate | |
Sodium polymethacrylate | |
Sodium polystyrene sulfonate | |
Sodium salicylate | For use as preservative only. |
Sodium salt of 1-hydroxy
2(1H)-pyridine thione | Do. |
Sodium tetradecylsulfate | |
Sodium thiocyanate | |
Sodium bis-tridecylsulfosuccinate | |
Sodium xylene sulfonate | |
Sorbitan monooleate | |
Sorbitan monostearate | |
Soybean oil, epoxidized | |
Spermaceti wax | |
Sperm oil wax | |
Stannous 2-ethylhexanoate | For use only as a catalyst for
polyurethane resins. |
Stannous stearate | |
Starch hydrolysates | |
Starch or starch modified by one or more of the
treatments described in 172.892 and 178.3520 of this chapter | |
Starch, reacted with a urea-formaldehyde resin | |
Starch, reacted with formaldehyde | |
Stearamide (stearic acid amide) | |
Stearic acid | |
Stearic acid-chromic chloride complex | |
Stearyl-cetyl alcohol, technical grade,
approximately 65 percent-80 percent stearyl and 20 percent-35 percent
cetyl | |
Strontium salicylate | |
Styrenated phenol | |
Styrene block polymers with 1,3-butadiene | |
Styrene-maleic anhydride copolymer, ammonium or
potassium salt | |
Styrene-maleic anhydride
copolymer (partially methylated) sodium salt | |
Styrene-methacrylic acid copolymer, potassium salt | |
Sucrose acetate isobutyrate | |
Sucrose benzoate | |
Sucrose octaacetate | |
2-sulfoethyl methacrylate
(CAS Registry No. 10595-80-9) | For
use at levels not to exceed 2 percent by weight of the dry adhesive. |
[alpha]-Sulfo-omega-(dodecyloxy)poly
(oxyethylene), ammonium salt | |
Sulfonated octadecylene
(sodium form) | |
Sulfosuccinic acid 4-ester
with polyethylene glycol dodecyl ether disodium salt (alcohol moiety
produced by condensation of 1 mole ofn-dodecyl alcohol and an
average of 5-6 moles of ethylene oxide, Chemical Abstracts Service
Registry No. 039354-45-5) | |
Sulfosuccinic acid 4-ester
with polyethylene glycol nonylphenyl ether, disodium salt (alcohol
moiety produced by condensation of 1 mole of nonylphenol and an average
of 9-10 moles of ethylene oxide) (CAS Reg. No. 9040-38-4) | |
Sulfur | |
Synthetic primary linear
aliphatic alcohols whose weight average molecular weight is greater than
400 (CAS Reg. No. 71750-71-5) | |
Synthetic wax polymer as
described in 176.170(a)(5) of this chapter | |
Tall oil | |
Tall oil fatty acids,
linoleic and oleic | |
Tall oil fatty acid methyl
ester | |
Tall oil, methyl ester | |
Tall oil pitch | |
Tall oil soaps | |
Tallow alcohol
(hydrogenated) | |
Tallow amine, secondary
(hexadecyl, octadecyl), of hard tallow | |
Tallow, blown (oxidized) | |
Tallow, propylene glycol ester | |
Terpene resins ([alpha]-and [beta]-pinene) homopolymers,
copolymers, and condensates with phenol, formaldehyde, coumarone, and/or
indene | |
Terphenyl | |
Terphenyl, hydrogenated | |
Terpineol | |
Tetraethylene pentamine | |
Tetraethylthiuram disulfide | |
Tetrahydrofuran | |
Tetrahydrofurfuryl alcohol | |
Tetra-isopropyl titanate | |
Tetrakis[methylene (3,5-di-tert-butyl-4-hydroxy-hydro-cinnamate)]
methane | |
a<[em>p-(1,1,3,3-Tetramethylbutyl)
phenyl]-omega-hydroxypoly-(oxyethylene) produced by the
condensation of 1 mole ofp-(1,1,3,3-tetramethylbutyl) phenol
with an average of 1-40 moles of ethylene oxide | |
a-<[em>p-(1,1,3,3-Tetramethylbutyl)
phenyl]-omega-hydroxy-poly(oxyethylene) mixture of dihydrogen
phosphate and monohydrogen phosphate esters and their sodium, potassium,
and ammonium salts having a poly(oxyethylene) content averaging 6-9 or
40 moles | |
Tetramethyl decanediol | |
Tetramethyl decynediol | |
Tetramethyl decynediol plus 1-30 moles of
ethylene oxide | |
Tetramethylthiuram
monosulfide | |
TetrasodiumN-(1,2-dicarboxyethyl)N-octadecylsulfosuccinamate | |
4,4'-Thiobis-6-tert-butyl-m-cresol | |
Thiodiethylene-bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate) | |
2,2'-(2,5-Thiophenediyl) bis[5-tert-butylbenzoxazole] | |
Thiram | |
Thymol | For use as preservative only. |
Titanium dioxide | |
Titanium dioxide-barium sulfate | |
Titanium dioxide-calcium sulfate | |
Titanium dioxide-magnesium silicate | |
Toluene | |
Toluene 2,4-diisocyanate | |
Toluene 2,6-diisocyanate | |
o- andp-Toluene ethyl
sulfonamide | |
o- andp-Toluene
sulfonamide | |
p-Toluene sulfonic
acid | |
p-(p'-Toluene-sulfonylamide)-diphenylamide | |
Triazine-formaldehyde resins as described in
175.300(b)(3)(xiii) | |
Tributoxyethyl phosphate | |
Tributylcitrate | |
Tri-tert-butyl-p-phenyl phenol | For use as preservative only. |
Tributyl phosphate | |
Tributyltin chloride complex of ethylene oxide
condensate of dehydroabietylamine | For use as preservative only. |
Tri-n-butyltin
acetate | For use as preservative
only. |
Tri-n-butyltin
neodecanoate | Do. |
1,1,1-Trichloroethane | |
1,1,2-Trichloroethane | |
Trichloroethylene | |
Tri-[beta]-chloroethylphosphate | |
Tridecyl alcohol | |
Triethanolamine | |
3-(Triethoxysilyl) propylamine | |
Triethylene glycol | |
Triethylene glycol dibenzoate | |
Triethylene glycol di(2-ethylhexoate) | |
Triethylene glycol polyester of benzoic acid
and phthalic acid | |
Triethylhexyl phosphate | |
Triethylphosphate | |
2,4,5-Trihydroxy butyrophenone | |
Triisopropanolamine | |
Trimethylol propane | |
2,2,4-Trimethylpentanediol-1,3-diisobutyrate | |
Trimeric aromatic amine resin from
diphenylamine and acetone of molecular weight approximately 500 | |
Tri(nonylphenyl) phosphite-formaldehyde resins | As identified in 177.2600(c)(4)(iii) of
this chapter. For use only as a stabilizer. |
Triphenylphosphate | |
Tripropylene glycol monomethyl ether | |
1,3,5-Tris (3,5-di-tert-butyl-4-hydroxy-benzyl)-triazine-2,4,6
(1H,3H,5H)-trione | |
Tris (p-tertiary
butyl phenyl) phosphate | |
Tris(2-methyl-4-hydroxy-5-tert-butyl-phenyl)butane | |
TrisodiumN-hydroxyethylethylenediaminetriacetate
(CAS Reg. No. 139-89-9) | |
Turpentine | |
Urea-formaldehyde resins as described in
175.300(b)(3)(xii) | |
Vegetable oil, sulfonated
or sulfated, potassium salt | |
Vinyl acetate-maleic
anhydride copolymer, sodium salt | |
Waxes, petroleum | |
Wax, petroleum, chlorinated (40% to 70%
chlorine) | |
Waxes, synthetic paraffin
(Fischer-Tropsch process) | |
3-(2-Xenolyl)-1,2-epoxypropane | |
Xylene | |
Xylene (or toluene)
alkylated with dicyclopentadiene | |
Zein | |
Zinc acetate | |
Zinc ammonium chloride | |
Zinc dibenzyl dithiocarbamate | |
Zinc dibutyldithiocarbamate | |
Zinc diethyldithiocarbamate | |
Zinc di(2-ethylhexoate) | |
Zinc formaldehyde sulfoxylate | |
Zinc naphthenate and dehydroabietylamine mixture | |
Zinc nitrate | |
Zinc orthophosphate | |
Zinc resinate | |
Zinc sulfide | |
Zineb (zinc ethylenebis-dithiocarbamate) | |
Ziram (zinc dimethyldithiocarbamate) | |